StartMotor gradersSany › PQ160III

Sany PQ160III

Series: Sany Motor Grader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PQ160III from Sany is part of the Sany Motor Grader series. The engine delivers 235.2 hp, has 6 cylinders. Rated speed is 2,200 rpm. The engine fitted is the QSB6,7-C173. Rated output across the Sany range ranges from 93.9 to 373.9 hp; the PQ160III sits in the middle of that range with 235.2 hp. Its immediate neighbours are the SY230 below it with 193.1 hp and the SY310 above it with 263.8 hp. 26 Sany models across 8 series are on record. The model is listed under Motor graders. 6 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSB6.7-C173correct
Power235.2 hpcorrect
Rated speed2,200 rpmcorrect
Cylinders6correct

Dimensions and weights

Length3,660.6correct

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Turning radius3,110 mmcorrect

More machines with this engine (Cummins QSB6.7-C173, 2)

Frequently asked questions

How much power does the Sany PQ160III have?

The Sany PQ160III delivers 235 hp.

What engine does the Sany PQ160III have?

6 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare