Technical register for agricultural, construction and commercial machinery · sourced data
StartElectric motorsSamt › YSS-80M2-4

Samt YSS-80M2-4

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Samt YSS-80M2-4 is a three-phase induction motor from the Samt range. The rated output is 0.75 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 80 M in foot-mounted form. The protection class is IP66. The efficiency is 82.5 per cent at full load, 82 per cent at 75 per cent load and 79.4 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B14, B34 and B35. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Samt range ranges from 0.75 to 90 kW; the YSS-80M2-4 sits at the bottom of that range with 0.75 kW. Its immediate neighbours are the E2-ASA-80b-2 above it with 1.1 kW. 123 Samt models are on record. The model is listed under Electric motors. 21 verified figures from 1 source are on file.

Samt – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 90 kW, 2- to 6-pole, Chinese-Romanian manufacture, efficiencies up to 95.5%

This page gathers the three-phase motors registered under the Samt brand in the Australian GEMS/MEPS register that could not be assigned to a named range. Samt's headquarters and group ownership cannot be reliably determined from the register; what is confirmed is the origin of manufacture: the majority of the 120 models come from China, a smaller share from Romania, and a single model from Rwanda. The type codes follow the pattern E2-ASA-frame size-pole count, for example E2-ASA-100La-2; the leading E2 is likely to indicate an efficiency class, ASA presumably an enclosure or material variant, though this cannot be reliably confirmed from the register.

Read on 3 more paragraphs

The register lists here 120 versions from 0.75 to 90 kW, 2- to 6-pole, with efficiencies from 79 to 95.5% at full load and 77.7 to 95.8% at 75% load, protection classes IP55 and IP66, and frame sizes from 80 to 280 (IEC). For 53 of the models the classification "2005 High Efficiency Level" is recorded; the rest carry no GEMS efficiency classification.

With an upper power limit of 90 kW and frame sizes up to 280, Samt covers a smaller and lighter drive spectrum in the register than most of the other brands gathered here; manufacture in China and Romania suggests a Europe-oriented distribution line alongside the Chinese core production.

For used Samt motors, the usual checkpoints for standard motors apply: measure the winding's insulation resistance, check the bearings for running noise and play, check the shaft turns freely, assess the condition of the fan and fan cowl, and match the rating plate – frame size, pole count, protection class and efficiency class – against the intended application. For inverter operation, check separately whether the winding insulation and bearings are rated for it, since the register contains no data on this.

Sources: Kennwerte der Modelle Samt (weitere Modelle)

Technical data

Engine

Rated output0.75 kWcorrect

Electrical data

Rated voltage230/240/400/415 Vcorrect
Number of poles4correct
Protection classIP66correct
Frame size80 M (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B34, B35correct
Efficiency at full load82.5 %correct
Efficiency at 75 % load82 %correct
Efficiency at half load79.4 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Samt YSS-80M2-4 have?

The Samt YSS-80M2-4 delivers 0.8 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare