Samro ST 38 RA
Built: 2007-2007 · Series: ST
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Samro ST – range from the French trailer maker Samro: seven versions, 7,240 to 21,970 kg unladen weight, 34 to 39 tonnes gross weight
The ST range brings together semi-trailers from the French manufacturer Samro, which specialises in curtainside trailers. The model list shows the base types ST 38 and ST 39 with numerous letter suffixes such as RA, WGRA, WGWA, WH, WHRA and WGPE, plus the ST 45 FH type, for individual equipment and body variants. The number in the type designation – 38, 39 or 45 – visibly corresponds to the weight class of the respective version.
Read on 3 more paragraphs
The register lists 7 versions with unladen weights from 7,240 to 21,970 kg at gross weights from 34,000 to 39,000 kg. Lengths range from 13,780 to 14,040 mm, widths from 2,550 to 2,600 mm.
With lengths of around 14 metres and gross weights of up to 39 tonnes, the ST range belongs to the semi-trailers of European long-distance haulage and competes with further French and central European makers of curtainside and special trailers. Within French road haulage, Samro ranks among the established names for trailer bodies alongside the larger pan-European manufacturers.
When buying a used trailer of this range, the frame and kingpin mount should be checked for cracks and wear, along with the condition of axles, brakes and suspension, and on curtainside bodies the condition and tightness of the tarpaulin, roof bows and locks. Tyres, lighting and landing legs belong to the standard check; spare parts for axles and brakes are available through the general commercial-vehicle parts trade.
Sources: Kennwerte der Modelle Samro ST
Technical data
Dimensions and weights
| Length | 13,950 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,530 mmcorrect |
| Unladen weight | 21,970 kgcorrect |
| Gross vehicle weight | 34,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Samro ST 38 RA weigh?
The unladen weight is 21,970 kg.
What is the gross vehicle weight of the Samro ST 38 RA?
34,000 kg.
Up to what speed is the Samro ST 38 RA approved?
Approved up to 100 km/h.
What are the dimensions of the Samro ST 38 RA?
13,950 mm × 2,550 mm.
When was the Samro ST 38 RA built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.