StartCombinesSalford › CX8080

Salford CX8080

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Salford CX8080 is a Combines from Salford. 243.1 kW is available. Rated speed is 2,100 rpm.

Within the range, rated power spans from 178 to 365 kW; with 243 kW, the CX8080 sits in the mid-field. Directly alongside are the CSX7080 Laterale with 224 kW below and the CR9060 with 264 kW above.

Technical data

Engine

Engine make2,358correct
Engine modelCursor 9correct
Power243.1 kWcorrect
Rated speed2,100 rpmcorrect

Dimensions and weights

Length9,070 mmcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect

Working data

Fuel tank capacity1,000.1 lcorrect

Frequently asked questions

How much power does the Salford CX8080 have?

The Salford CX8080 delivers 243 kW.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare