Salford CX8060
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Salford – other models: the collective page of combine harvesters outside the named ranges, from the CS6050 through the CSX7060/7080 and CX8030 to CX8090 to the CR9080 and TX68, 177.5 to 364.6 kW
This page gathers the combine harvester models the register could not assign to a named range under the Salford label – from the smaller CS6050 through the CSX7060 and CSX7080, each also in a Laterale version for use on sloping ground, and the CX8030 to CX8090 to the larger classes CR9060 to CR9080 and the TX63 to TX68. The model numbers rise with machine size: within each letter series the first digit after the letter marks the class, with the CX8030 as the smallest and the CX8090 as the largest model in the range.
Read on 3 more paragraphs
The register lists here 21 versions with 177.5 to 364.6 kW, lengths from 8,120 to 9,970 mm and a uniform engine speed of 2,100 rpm; the engines recorded are the six-cylinder Cursor 9, the larger Cursor 10, a six-cylinder of around 6.7 litres and units designated NH 675 TA/CB.
Combines in this power class, between around 240 and almost 500 hp, cover the whole span of grain and maize harvesting from a mid-sized farm to a large operation; the Laterale version with its lateral levelling function is aimed specifically at farms on undulating or sloping ground.
When buying used, what matters is the drum and concave, the condition of the straw walkers or rotor, sieve and chopper settings, engine hours and the condition of tyres and header platform; the Laterale levelling equipment should be checked for function before purchase.
Sources: SpecCodex register, model data: Salford (weitere Modelle)
Technical data
Engine
| Engine model | Cursor 9correct |
|---|---|
| Power | 223 kWcorrect |
| Rated speed | 2,100 rpmcorrect |
Dimensions and weights
| Length | 9,070 mmcorrect |
|---|
Drivetrain and chassis
| Gearbox type | hydrostatic transmissioncorrect |
|---|
Working data
| Fuel tank capacity | 750.3 lcorrect |
|---|
More machines with this engine (Cursor 9, 7)
Frequently asked questions
How much power does the Salford CX8060 have?
The Salford CX8060 delivers 223 kW.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
CR9060
CR9070 Elevation
CR9080 Elevation
CS6050
CS6060 Laterale
CS6080
CSX7060
CSX7060 Laterale
CSX7080
CSX7080 Laterale
CX8030
CX8040
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.