Start › Road construction › Sakai › SW352

Sakai SW352

Series: Sakai Vibratory Smooth Drum Roller

The photo shows the SW850 from the same series. Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SW352 from Sakai is part of the Sakai Vibratory Smooth Drum Roller series. The engine delivers 27.4 hp (20.1 kW). Rated speed is 2,300 rpm. The unladen weight is 2,940 kg. Ground clearance is 250.2 mm. Top speed is 12.1 km/h. The tank holds 40.1 litres. The engine fitted is the D1503-KA. The Sakai Vibratory Smooth Drum Roller series covers 31 models. Rated output within it ranges from 14.1 to 171.3 hp; the SW352 sits at the bottom of that range with 27.4 hp. Its immediate neighbours are the CR270 below it with 18 hp and the SW350-1 above it with 28.6 hp. 50 Sakai models across 5 series are on record. The model is listed under Road construction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD1503-KAcorrect
Power27.4 hp (20.1 kW)correct
Rated speed2,300 rpmcorrect

Dimensions and weights

Width1,292.4correct
Ground clearance250.2correct
Unladen weight2,940 kgcorrect

Drivetrain and chassis

Top speed12.1 km/hcorrect

Working data

Fuel tank capacity40.1 lcorrect

Other data

Height1,581.9correct

Where this model stands

Power-to-weight ratio: 6.8 kW/t (20 kW / 2.9 t)

Stronger than 8% of the road construction in the register — out of 669 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sakai SW352 have?

The Sakai SW352 delivers 27.4 hp.

How much does the Sakai SW352 weigh?

The unladen weight is 2,940 kg.

How fast does the Sakai SW352 go?

Top speed is 12.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

CR270

SV201D

SV400D

SV512D

SV700D

SV900D

SV900DV

SW200

SW230

SW250

SW300

SW320

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare