Riiko LAVETTI
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Riiko T 38: heavy EU class O4 trailer with a gross weight of 38,000 kg, a length of 11,150 mm and an unladen weight of 7,700 kg, built in 2020
With a gross weight of 38,000 kg, the Riiko T 38 falls into EU trailer class O4, the heavy trailers and semi-trailers above 10 tonnes. Vehicles in this class run on compressed-air brakes and are used in commercial long-haul transport behind heavy tractor units. At 38 tonnes gross weight, the T 38 sits at the upper end of trailer weights permitted on public roads.
Read on 3 more paragraphs
At a length of 11,150 mm and a width of 2,550 mm, the T 38 is a comparatively compact trailer for its weight class. An unladen weight of 7,700 kg against a payload of around 30,300 kg gives a ratio typical of heavy trailers, with payload making up around four-fifths of the gross weight. The 2020 build year makes the T 38 a comparatively young design, already built to current brake regulations for class O4.
A towing combination with a trailer of this weight requires a category CE licence. The compressed-air brake system must be matched to the towing vehicle and is checked at the periodic roadworthiness inspection together with the lighting and the trailer coupling. In such a compact, high-payload trailer, the load concentrates on a comparatively short chassis length, calling for sturdy axles and a correspondingly sized brake system.
For a trailer from the 2020 build year, buying used means looking first at operating hours and load intensity, since even a young vehicle can show heavy wear on axles and brakes if run constantly near its payload limit. Tyres and brake linings should be checked for even wear, and the frame for signs of overload around the axle mounts. Spare parts for a trailer of this build year are usually readily available from the manufacturer or independent commercial-vehicle parts dealers.
Sources: SpecCodex-Register: Kennwerte des Modells Riiko T 38
Technical data
Dimensions and weights
| Length | 14,740 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 9,480 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Frequently asked questions
How much does the Riiko LAVETTI weigh?
The unladen weight is 9,480 kg.
What is the gross vehicle weight of the Riiko LAVETTI?
42,000 kg.
What are the dimensions of the Riiko LAVETTI?
14,740 mm × 2,550 mm.
When was the Riiko LAVETTI built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.