Renders RMAC 8.16
Built: 2003 · Series: RMAC
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders RMAC – Dutch class O4 heavy-duty trailers: unladen weight 4,750 to 5,860 kg, gross weight 18,000 to 24,000 kg, lengths up to 10,800 mm, widths up to 2,550 mm
Renders is a Dutch trailer manufacturer; the RMAC range bundles several sizes under one model designation, recognisable from suffixes such as 8.16, 9.9 and 10.10 that distinguish the sizes within the range, along with further letters marking additional build variants within the same size.
Read on 3 more paragraphs
The register lists 6 versions with unladen weights from 4,750 to 5,860 kg, gross weights from 18,000 to 24,000 kg, lengths from 8,860 to 10,800 mm and widths from 2,500 to 2,550 mm. With gross weights of 18 to 24 tonnes, the entire range falls into vehicle class O4, above the 10-tonne threshold that separates it from the lighter O2 and O3 trailers.
As a heavy trailer of this weight class, the RMAC range belongs to the working equipment of commercial road haulage in the Netherlands and neighbouring Germany, where it is pulled behind tractor units or heavy trucks as a drawbar combination for general cargo, building materials or machinery transport, adding load volume without a second articulated unit.
When buying used in this weight class, axles, the braking system and tyre condition matter most, along with the chassis and drawbar for cracks and corrosion, the trailer coupling and the wiring of the brake-light system, and, depending on the body, the condition of the tarpaulin, sideboards or loading floor; spare parts run through the Dutch commercial-vehicle trade.
Sources: SpecCodex register, model data: Renders RMAC
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 2,620 mmcorrect |
| Unladen weight | 5,620 kgcorrect |
| Gross vehicle weight | 24,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Renders RMAC 8.16 weigh?
The unladen weight is 5,620 kg.
What is the gross vehicle weight of the Renders RMAC 8.16?
24,000 kg.
Up to what speed is the Renders RMAC 8.16 approved?
Approved up to 100 km/h.
When was the Renders RMAC 8.16 built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.