Renders R0C 12.20 E
Built: 1996-1996 · Series: R0C
More machines from model year 1996
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders R0C – container and tipper semi-trailers from the Netherlands: unladen weight 4,660 to 8,650 kg, gross weight 22,000 to 39,000 kg, length up to 13,800 mm, width 2,500 to 2,580 mm
Renders is a Dutch semi-trailer manufacturer. The R0C range gathers the company's container and tipper semi-trailers in the register; type designations such as R0C 12.10, R0C 12.20 E and R0C 12 27 CC 30 distinguish build length, equipment and axle count within the range. With gross weights consistently above 10 tonnes, every version falls into the heavy semi-trailer class O4.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 4,660 to 8,650 kg, gross weights from 22,000 to 39,000 kg and widths from 2,500 to 2,580 mm; lengths run from 8,360 to 13,800 mm.
Container and tipper semi-trailers of this kind are common in port-hinterland and building-materials haulage, carrying swap containers, skip containers or bulk goods, and within their gross weight ratings are built for heavy payloads. This duty brings frequent axle-load changes, intensive transshipment work and running on the uneven ground of building sites.
When buying used, check the twist locks for container transport, the condition of the tipping ram and hydraulic lines on the tipper versions, and the chassis, axles and braking system. Corrosion on the side rails, wear on the landing legs and kingpin, and the tightness of the hydraulic connections reveal how hard the trailer has worked in transshipment service over the years.
Sources: Kennwerte der Modelle Renders R0C
Technical data
Dimensions and weights
| Length | 12,950 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,630 mmcorrect |
| Unladen weight | 8,650 kgcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Renders R0C 12.20 E weigh?
The unladen weight is 8,650 kg.
What is the gross vehicle weight of the Renders R0C 12.20 E?
30,000 kg.
Up to what speed is the Renders R0C 12.20 E approved?
Approved up to 100 km/h.
What are the dimensions of the Renders R0C 12.20 E?
12,950 mm × 2,550 mm.
When was the Renders R0C 12.20 E built?
Production years: 1996.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.