Technical register for agricultural, construction and commercial machinery · sourced data
StartVansRenault › MASTER, 2.3 DCI

Renault MASTER, 2.3 DCI

Built: 2020-2020 · Series: Master

More machines from model year 2020

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MASTER, 2.3 DCI comes from Renault. Production: 2020. The engine has 4 cylinders, with a displacement of 2,299 cm³. The machine is 2,240 mm wide. The unladen weight is 2,600 kg. The wheelbase measures 4,330 mm. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. Unladen weight across the Renault range ranges from 600 to 30,800 kg; the MASTER, 2.3 DCI sits at the bottom of that range with 2,600 kg. Its immediate neighbours are the 2.5DCI 120-3.5T-3-EDC1L6 below it with 2,590 kg and the MASCOTT FOURGON above it with 2,610 kg. 2646 Renault models across 64 series are on record. The model is listed under Vans. 9 verified figures from 1 source are on file.

Renault Master – four generations since 1980, twin of the Opel Movano and Nissan Interstar: dCi engines, T28 to T35, L1H1 to L4H3

The Master is Renault's large van above the Trafic, built since 1980 in four generations: Master I until 1997, Master II from 1997 to 2010 – for the first time identical to the Opel/Vauxhall Movano and Nissan Interstar – Master III from 2010 to 2024 with front- or rear-wheel drive and twin rear wheels up to 4.5 t, and Master IV since 2024 with much improved aerodynamics and an electric version. The engines of the second and third generation are called dTi and dCi: the 1.9 litre diesel, the 2.2 and 2.5 litre dCi, and in the third generation the 2.3 litre dCi throughout, with 100 to over 170 hp.

Read on 3 more paragraphs

In the register the designation reads as gross weight plus body: 2.8T or T28 stands for 2.8 t, T33 for 3.3 t, T35 for 3.5 t, L1 to L4 for wheelbase and length, H1 to H3 for roof height, DC or 'Dubbele Cabine' for the crew cab – many records come from Dutch registrations. Values run from 1,695 to 3,340 kg unladen, 2,207 to 3,510 kg gross and 4,899 to 7,620 mm long; displacements lie between 1,870 and 2,983 cm³, always four cylinders, recorded outputs between 59 and 125 kW.

The variety of panel van, chassis, dropside and tipper makes the Master the basis for refrigerated boxes, motorhomes and municipal vehicles; front-wheel drive keeps the loading sill low, rear-wheel drive carries the heavy bodies.

On used 2.3 dCi engines, injectors, turbocharger and particulate filter condition matter, and on front-drive models the driveshafts and wheel bearings under constant load.

Sources: Kennwerte der Modelle Renault Master (Zulassungsdaten), Renault Nutzfahrzeuge (Hersteller), Master (Wikipedia)

Technical data

Engine

Cylinders4correct
Displacement2,299 cm³correct

Dimensions and weights

Width2,240 mmcorrect
Wheelbase4,330 mmcorrect
Unladen weight2,600 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Renault MASTER, 2.3 DCI weigh?

The unladen weight is 2,600 kg.

What is the gross vehicle weight of the Renault MASTER, 2.3 DCI?

3,500 kg.

What engine does the Renault MASTER, 2.3 DCI have?

4 cylinders, 2,299 cm³ displacement.

When was the Renault MASTER, 2.3 DCI built?

Production years: 2020.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
3 current listings for Renault MASTER, 2.3 DCI on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare