Remx MSHE90S-4
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Remx – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 160 kW, 2- to 8-pole, IP55/IP56, Chinese manufacture, efficiencies up to 96.6%
This page gathers the three-phase motors registered under the Remx brand in the Australian GEMS/MEPS register that could not be assigned to a named range. Remx's headquarters and group ownership cannot be reliably determined from the register; what is confirmed is that all 252 models recorded here come from Chinese manufacture. The type codes follow the pattern DG-frame size-additional code-pole count, for example DG-100L-28-2. For roughly half of the models with a motor family recorded, the family name begins with the suffix IE2 (for instance IE2802-19-4 or IE2100L1-28-4), which could point to an internally tracked efficiency class in model management – this cannot be finally confirmed from the register alone.
Read on 3 more paragraphs
The register lists here 252 versions from 0.75 to 160 kW, 2- to 8-pole, with efficiencies from 73.3 to 96.6% at full load and 72.9 to 96.8% at 75% load, protection classes IP55 and IP56, and frame sizes from 80 (IEC) upwards. Of the 109 models with a GEMS efficiency classification recorded, none carry a "High Efficiency Level" designation.
In the register, Remx appears as a straightforward supplier of standard motors for the Australian and New Zealand market, with a pole-count and power span that is broad for this size class, reaching from small pump motors to drives for larger compressors and conveying plant.
For a used purchase, the standard checkpoints for standard motors apply: measure the winding's insulation resistance, check the bearings for running noise, heat build-up and play, check the shaft turns freely, and match the condition of the fan and fan cowl and the rating plate – frame size, pole count, protection class and efficiency class – against the intended use. For inverter operation, winding insulation and bearings should be checked separately, since the register carries no data on this.
Technical data
Engine
| Rated output | 1.1 kWcorrect |
|---|
Electrical data
| Rated voltage | 400 Vcorrect |
|---|---|
| Number of poles | 4correct |
| Protection class | IP55correct |
| Frame size | 90 S (foot)correct |
| Mounting (IEC 60034-7) | B3correct |
| Efficiency at full load | 83.9 %correct |
| Efficiency at 75 % load | 84.2 %correct |
| Efficiency at half load | 81.8 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct |
|---|---|
| Test method | AS 1359.102.1:1997correct |
Frequently asked questions
How much power does the Remx MSHE90S-4 have?
The Remx MSHE90S-4 delivers 1.1 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DG-100L-28-2
DG-100L-28-6
DG-100L1-28-4
DG-100L1-28-8
DG-100L2-28-4
DG-100L2-28-8
DG-112M-28-2
DG-112M-28-4
DG-112M-28-6
DG-112M-28-8
DG-132M-38-4
DG-132M-38-8
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.