Technical register for agricultural, construction and commercial machinery · sourced data
StartElectric motorsRemx › MSHE132S2-2

Remx MSHE132S2-2

Series: Other models

The photo shows the YHIE2160L-42-6 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/elektra-beckum-motor-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Remx MSHE132S2-2 is a three-phase induction motor built by Remx. The rated output is 7.5 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP55. The efficiency is 89.6 per cent at full load, 90.1 per cent at 75 per cent load and 89.6 per cent at half load. The mounting arrangement to IEC 60034-7 is B3. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2012; measured to AS 1359.102.1:1997. Rated output across the Remx range ranges from 0.75 to 160 kW; the MSHE132S2-2 sits at the bottom of that range with 7.5 kW. Its immediate neighbours are the YHIE2160M2-42-8 below it with 5.5 kW and the MSHE132M-2 above it with 9.2 kW. 252 Remx models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

Remx – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 160 kW, 2- to 8-pole, IP55/IP56, Chinese manufacture, efficiencies up to 96.6%

This page gathers the three-phase motors registered under the Remx brand in the Australian GEMS/MEPS register that could not be assigned to a named range. Remx's headquarters and group ownership cannot be reliably determined from the register; what is confirmed is that all 252 models recorded here come from Chinese manufacture. The type codes follow the pattern DG-frame size-additional code-pole count, for example DG-100L-28-2. For roughly half of the models with a motor family recorded, the family name begins with the suffix IE2 (for instance IE2802-19-4 or IE2100L1-28-4), which could point to an internally tracked efficiency class in model management – this cannot be finally confirmed from the register alone.

Read on 3 more paragraphs

The register lists here 252 versions from 0.75 to 160 kW, 2- to 8-pole, with efficiencies from 73.3 to 96.6% at full load and 72.9 to 96.8% at 75% load, protection classes IP55 and IP56, and frame sizes from 80 (IEC) upwards. Of the 109 models with a GEMS efficiency classification recorded, none carry a "High Efficiency Level" designation.

In the register, Remx appears as a straightforward supplier of standard motors for the Australian and New Zealand market, with a pole-count and power span that is broad for this size class, reaching from small pump motors to drives for larger compressors and conveying plant.

For a used purchase, the standard checkpoints for standard motors apply: measure the winding's insulation resistance, check the bearings for running noise, heat build-up and play, check the shaft turns freely, and match the condition of the fan and fan cowl and the rating plate – frame size, pole count, protection class and efficiency class – against the intended use. For inverter operation, winding insulation and bearings should be checked separately, since the register carries no data on this.

Sources: Kennwerte der Modelle Remx (weitere Modelle)

Technical data

Engine

Rated output7.5 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load89.6 %correct
Efficiency at 75 % load90.1 %correct
Efficiency at half load89.6 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS 1359.102.1:1997correct

Frequently asked questions

How much power does the Remx MSHE132S2-2 have?

The Remx MSHE132S2-2 delivers 7.5 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare