Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › RCG › T3D4ARCG

RCG T3D4ARCG

Series: Other models

The photo shows the T1.5D4A-RCG from the same series. Source: https://www.still.dz/produits/chariots-neufs/chariots-elevat

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The RCG T3D4ARCG is a three-phase induction motor built by RCG. The rated output is 3 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 100 L in foot-mounted form. The protection class is IP55. The efficiency is 86.5 per cent at full load, 85.9 per cent at 75 per cent load and 82.9 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B14, B34, B35 and V1. The motor is built in China. The figures come from the Australian MEPS register under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the RCG range ranges from 0.75 to 160 kW; the T3D4ARCG sits at the bottom of that range with 3 kW. Its immediate neighbours are the T2.2D6ARCG below it with 2.2 kW and the T004D2ARCG above it with 4 kW. 130 RCG models are on record. The model is listed under Electric motors. 22 verified figures from 1 source are on file.

RCG – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 160 kW, 2- to 8-pole, IP55/IP56, Chinese manufacture, efficiencies up to 96.6%

This page gathers the three-phase motors registered under the RCG brand in the Australian GEMS/MEPS register that could not be assigned to a named range. RCG's headquarters and group ownership cannot be reliably determined from the register; what is confirmed is that all 130 models recorded here come from Chinese manufacture. The type codes recognisably follow the pattern T-power rating-D-pole count-suffix-RCG, for example T001.5D4HRCG for a motor of roughly 1.5 kW with four poles, where the H is likely to mark a design variant (for instance a higher efficiency step); the precise meaning of the individual letters cannot be conclusively established from the register alone.

Read on 3 more paragraphs

The register lists here 130 versions from 0.75 to 160 kW, 2- to 8-pole, with efficiencies from 76 to 96.6% at full load and 73.51 to 96.8% at 75% load, protection classes IP55 and IP56 in roughly equal shares, and frame sizes from 80 to 315 (IEC). No GEMS "High Efficiency Level" classification is recorded for any of the 130 models.

In the register, RCG appears as a straightforward supplier of standard motors for the Australian and New Zealand market; without confirmed manufacturer information, its market role can only be read from the register data itself, as a supplier of a full spectrum of outputs and pole counts for standard applications.

For used RCG motors, the usual checkpoints for standard motors apply: measure the winding's insulation resistance, check the bearings for running noise and play, check the shaft turns freely, assess the condition of the fan and fan cowl, and match the rating plate – frame size, pole count, protection class and efficiency class – against the intended application. For inverter operation, check separately whether the winding insulation and bearings are rated for it, since the register contains no data on this.

Sources: Kennwerte der Modelle RCG (weitere Modelle)

Technical data

Engine

Rated output3 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size100 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B14, B34, B35, V1correct
Efficiency at full load86.46 %correct
Efficiency at 75 % load85.93 %correct
Efficiency at half load82.9 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the RCG T3D4ARCG have?

The RCG T3D4ARCG delivers 3 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

T.75D2ARCG

T.75D4ARCG

T.75D6ARCG

T000.75D4RCG

T001.1D2RCG

T001.1D4HRCG

T001.1D4RCG

T001.1D6RCG

T001.5D2HRCG

T001.5D2RCG

T001.5D4HRCG

T001.5D4RCG

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare