Technical register for agricultural, construction and commercial machinery · sourced data
StartElectric motorsRCG › T075D4RCG

RCG T075D4RCG

Series: Other models

The photo shows the T1.5D4A-RCG from the same series. Source: https://www.still.dz/produits/chariots-neufs/chariots-elevat

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The T075D4RCG from RCG is a three-phase induction motor. The rated output is 75 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 250 M in foot-mounted form. The protection class is IP56. The efficiency is 95.4 per cent at full load, 95.5 per cent at 75 per cent load and 95 per cent at half load. The motor weighs 465 kg. The mounting arrangement to IEC 60034-7 is B3. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2012; measured to AS/NZS 1359.102.3:2000. Rated output across the RCG range ranges from 0.75 to 160 kW; the T075D4RCG sits in the middle of that range with 75 kW. Its immediate neighbours are the T055D6RCG below it with 55 kW and the T090D2RCG above it with 90 kW. 130 RCG models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

RCG – other models: the collective page of three-phase motors from the Australian GEMS/MEPS register, 0.75 to 160 kW, 2- to 8-pole, IP55/IP56, Chinese manufacture, efficiencies up to 96.6%

This page gathers the three-phase motors registered under the RCG brand in the Australian GEMS/MEPS register that could not be assigned to a named range. RCG's headquarters and group ownership cannot be reliably determined from the register; what is confirmed is that all 130 models recorded here come from Chinese manufacture. The type codes recognisably follow the pattern T-power rating-D-pole count-suffix-RCG, for example T001.5D4HRCG for a motor of roughly 1.5 kW with four poles, where the H is likely to mark a design variant (for instance a higher efficiency step); the precise meaning of the individual letters cannot be conclusively established from the register alone.

Read on 3 more paragraphs

The register lists here 130 versions from 0.75 to 160 kW, 2- to 8-pole, with efficiencies from 76 to 96.6% at full load and 73.51 to 96.8% at 75% load, protection classes IP55 and IP56 in roughly equal shares, and frame sizes from 80 to 315 (IEC). No GEMS "High Efficiency Level" classification is recorded for any of the 130 models.

In the register, RCG appears as a straightforward supplier of standard motors for the Australian and New Zealand market; without confirmed manufacturer information, its market role can only be read from the register data itself, as a supplier of a full spectrum of outputs and pole counts for standard applications.

For used RCG motors, the usual checkpoints for standard motors apply: measure the winding's insulation resistance, check the bearings for running noise and play, check the shaft turns freely, assess the condition of the fan and fan cowl, and match the rating plate – frame size, pole count, protection class and efficiency class – against the intended application. For inverter operation, check separately whether the winding insulation and bearings are rated for it, since the register contains no data on this.

Sources: Kennwerte der Modelle RCG (weitere Modelle)

Technical data

Engine

Rated output75 kWcorrect

Dimensions and weights

Weight465 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP56correct
Frame size250 M (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load95.4 %correct
Efficiency at 75 % load95.5 %correct
Efficiency at half load95 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the RCG T075D4RCG have?

The RCG T075D4RCG delivers 75 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare