Start › Electric motors › RCG › T045D4RCG

RCG T045D4RCG

Series: Other models

The photo shows the T1.5D4A-RCG from the same series. Source: https://www.still.dz/produits/chariots-neufs/chariots-elevat

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The RCG T045D4RCG is a three-phase induction motor built by RCG. The rated output is 45 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The rated voltage is 400 V. The housing is frame size 180 L in foot-mounted form. The protection class is IP56. The efficiency is 94.7 per cent at full load, 95.2 per cent at 75 per cent load and 94.8 per cent at half load. The motor weighs 333 kg. The mounting arrangement to IEC 60034-7 is B3. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2012; measured to AS/NZS 1359.102.3:2000. Rated output across the RCG range ranges from 0.75 to 160 kW; the T045D4RCG sits in the lower part of that range with 45 kW. Its immediate neighbours are the T037D6RCG below it with 37 kW and the T055D2RCG above it with 55 kW. 130 RCG models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output45 kWcorrect

Dimensions and weights

Weight333 kgcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles4correct
Protection classIP56correct
Frame size180 L (foot)correct
Mounting (IEC 60034-7)B3correct
Efficiency at full load94.7 %correct
Efficiency at 75 % load95.21 %correct
Efficiency at half load94.81 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the RCG T045D4RCG have?

The RCG T045D4RCG delivers 45 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

T.75D2ARCG

T.75D4ARCG

T.75D6ARCG

T000.75D4RCG

T001.1D2RCG

T001.1D4HRCG

T001.1D4RCG

T001.1D6RCG

T001.5D2HRCG

T001.5D2RCG

T001.5D4HRCG

T001.5D4RCG

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare