StartForklift trucksRaymond › 4200-C40

Raymond 4200-C40

Series: Other models

The photo shows the 4100-C30 from the same series. Source: https://www.forkliftaction.com/news/raymond-forklifts-go-fro

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Raymond 4200-C40 is a forklift truck from Raymond.

It will not go faster than 12 km/h — a working pace, not a travelling one. Capacity is 1,361 kg.

Technical data

Engine

Engine modelElectric enginecorrect

Drivetrain and chassis

Tyre typedrive: 16.25x7, steering 10x7x6.5correct
Top speed11.6 km/hcorrect
Turning radius18,440 mmcorrect

Working data

Lifting capacity1,360.8 kgcorrect
Lift height26,820 mmcorrect

Other data

Front wheels2correct
Lift speed33.5 m/mincorrect
Mast tilt backcorrect
Mast tilt forwardcorrect
Rear wheels2correct
Senkgeschwindigkeit mmin27.4 m/mincorrect

Frequently asked questions

How fast does the Raymond 4200-C40 go?

Top speed is 11.6 km/h.

What is the load capacity of the Raymond 4200-C40?

Load capacity is 1,361 kg, lift height 26,820 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare