Prolines Provion FIN 100
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Prolines – other models: the collective page of trailers outside the named ranges, Cont 2000, Pro-2+4-42 and Provion Fin 100, 7,910 to 20,000 kg unladen weight, 42,000 to 50,000 kg gross weight
This page gathers the Prolines trailers the register could not assign to a named range – with only three versions this amounts to the whole programme listed here. The types Cont 2000, Pro-2+4-42 and Provion Fin 100 each carry their own naming pattern, with no shared system readable from them. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 7,910 to 20,000 kg, gross weights from 42,000 to 50,000 kg, lengths from 13,780 to 15,450 mm and widths from 2,550 to 2,600 mm.
With gross weights of 42 to 50 tonnes and lengths of up to over 15 metres, all three versions fall into the heaviest trailer class, typical of semi-trailers and tandem-axle trailers in heavy-haul and container transport behind suitably rated tractor units; driving such combinations requires a category CE licence.
On a used example of this size, the condition of axles, brake system and fifth-wheel coupling, rust on frame and side rails, the state of locks and load-bed body, and tyres and rims all count in particular; the wide spread in unladen weight points to different body types between container and general haulage. Parts for such small brands usually run through independent commercial-vehicle workshops.
Sources: SpecCodex register, model data: Prolines (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,780 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Unladen weight | 20,000 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Frequently asked questions
How much does the Prolines Provion FIN 100 weigh?
The unladen weight is 20,000 kg.
What is the gross vehicle weight of the Prolines Provion FIN 100?
42,000 kg.
What are the dimensions of the Prolines Provion FIN 100?
13,780 mm × 2,600 mm.
When was the Prolines Provion FIN 100 built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.