Start › Forestry equipment › Ponsse › Wisent

Ponsse Wisent

Series: Ponsse Forwarder

Source: https://news.ponsse.com/en/ponsses-new-solutions-for-sustain

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ponsse Wisent is a model in the Ponsse Forwarder series. Ground clearance is 646.2 mm. Top speed is 28 km/h. The tank holds 130.2 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. Maximum torque is reached at 1,600 rpm. The hydraulic tank holds 130.2 litres. The electrical system runs on 24 V. The engine fitted is the OM904LA. 32 Ponsse models across 3 series are on record. The model is listed under Forestry equipment. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine model	OM904LAcorrect
Speed at max. torque	1,600 rpmcorrect

Dimensions and weights

Ground clearance	646.2correct

Drivetrain and chassis

Gearbox type	hydrostatic transmission-mechanical gearboxcorrect
Forward gears	2correct
Reverse gears	2correct
Top speed	28 km/hcorrect
System voltage	24 Vcorrect

Working data

Hydraulic oil capacity	130.2 lcorrect
Fuel tank capacity	130.2 lcorrect

Frequently asked questions

How fast does the Ponsse Wisent go?

Top speed is 28 km/h.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →