Pma C6807
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Pma C6807 is a tractor made by Pma. It is powered by a four-cylinder engine producing 51 kW. Rated power is reached at 2,300 rpm.
It runs on diesel; the engine is air-cooled. It was replaced by the CMT C6807. Within the range, rated power spans from 46 to 51 kW; with 51 kW, the C6807 sits at the top. Below it ranks the C6806 with 50 kW.
Technical data
Engine
| Engine make | CMT (Deutz licensedcorrect |
|---|---|
| Engine model | F4L 912correct |
| Fuel | dieselcorrect |
| Power | 68 hp (51 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,768 lcorrect |
| Cooling | air-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Clutch | dual dry platecorrect |
Working data
| Linkage category | Cat IIcorrect |
|---|
Origin and approval
| Plant | Algeriacorrect |
|---|---|
| Successor | CMT C6807correct |
Frequently asked questions
How much power does the Pma C6807 have?
The Pma C6807 delivers 68 hp.
What engine does the Pma C6807 have?
4 cylinders, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.