Phoenix 2800
Built: 1987-1991 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Phoenix 2800 rolled off the line in 1987-1991 as a tractor. It is powered by an eight-cylinder engine producing 205 kW. Rated power is reached at 2,100 rpm.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 160 to 310 kW; with 205 kW, the 2800 sits in the lower third. Directly alongside are the 2100 with 160 kW below and the 3500 with 256 kW above.
Technical data
Engine
| Engine make | Mercedes-Benzcorrect |
|---|---|
| Engine model | MB422correct |
| Fuel | dieselcorrect |
| Power | 275 hp (205 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 8correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 3correct |
Origin and approval
| Plant | Australiacorrect |
|---|
Frequently asked questions
How much power does the Phoenix 2800 have?
The Phoenix 2800 delivers 275 hp.
What engine does the Phoenix 2800 have?
8 cylinders, Diesel.
When was the Phoenix 2800 built?
Production years: 1987-1991.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.