Technical register for agricultural, construction and commercial machinery · sourced data

Perkins C0.7

Built: 2020-2021 · Series: Other models

More machines from model year 2020

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Perkins C0.7 is a machine built by Perkins. Production: 2020-2021. The fuel is 7-15 ppm Ultra Low Sulfur Diesel. The rated output is 6 kW. The engine is naturally aspirated. The engine meets emissions stage Tier 4 (Final or Phase In). Fuel reaches the combustion chamber through indirect injection. It is a four-stroke diesel engine. The cylinders are arranged in line. Rated output across the Perkins range ranges from 4 to 678 kW; the C0.7 sits at the bottom of that range with 6 kW. Its immediate neighbours are the C0.5 below it with 4 kW and the 402F-05(C0.5) above it with 7 kW. 352 Perkins models are on record.

Perkins – other nonroad diesel engines: the collective page of the two- to six-cylinder ranges outside the named models, 4 to 678 kW, Tier 3 to Tier 4 Final, direct and indirect injection

Perkins of Peterborough has belonged wholly to Caterpillar since 1998 and has supplied diesel engines for farm machinery, construction equipment and generator sets since the 1930s; the type logic combines a four-digit Perkins range number (1104, 1204, 1206, 2206, 2506) with a suffix letter for the generation (D, E, F, J) and often the parallel Caterpillar displacement figure in litres. This page gathers the engines the register could not assign to a named range; notable is the mix of direct injection and the indirect injection still common on the smaller cylinder counts, plus two parallel fuel specifications, the US ultra-low-sulphur diesel standard and Perkins' own distillate diesel specification for export markets.

Read on 3 more paragraphs

The register lists here 352 versions with 4 to 678 kW rated output up to 2,800 rpm, from two- to six-cylinders with 67 to 145 mm bore and 72 to 183 mm stroke, torques from 18.6 to 5,500 Nm. Tier 3 leads with 210 versions ahead of Interim Tier 4 with 71 and Tier 4 (Final or Phase-in) also with 71; a portion of the engines is certified only for states outside California.

The engines cover the mid-range power segment from mini excavators through wheel loaders to medium-size generator sets; here Perkins serves both Caterpillar's own construction machinery and a broad field of independent farm and construction machinery makers.

On a used purchase, operating hours count, on indirect-injection engines the glow-plug system and cold-start behaviour, on direct-injection engines the injectors and injection pump, the turbocharger and its boost-pressure control, and on the newer Tier 4 versions the exhaust aftertreatment; parts supply runs through the dense Perkins dealer network.

Sources: Kennwerte der Modelle Perkins (weitere Nonroad-Dieselmotoren), Perkins Engines (Caterpillar, Hersteller)

Technical data

Engine

Engine code6546/1800correct
Engine familyPPKXL.761F1C; LPKXL.761F1C; NPKXL.761F1Ccorrect
Engine familiesPPKXL.761F1C; LPKXL.761F1C; NPKXL.761F1Ccorrect
Fuel7-15 ppm Ultra Low Sulfur Dieselcorrect
Rated output6 kWcorrect
Power bandkW<8correct
Rated speed1,800 rpmcorrect
Maximum torque31.3 N·mcorrect
Speed at max. torque1,800 rpmcorrect
Cylinders3correct
Cylinder layoutin linecorrect
Bore67 mmcorrect
Stroke72 mmcorrect
Operating cyclefour-stroke dieselcorrect
Injectionindirect injectioncorrect
Aspirationnaturally aspiratedcorrect
Emissions stageTier 4 (Final or Phase In)correct

Origin and approval

Version6546/1800correct
Built from2020correct
Built to2023correct
Model year from2020correct
Model year to2024correct

Frequently asked questions

How much power does the Perkins C0.7 have?

The Perkins C0.7 delivers 6 kW.

When was the Perkins C0.7 built?

Production years: 2020-2021.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Diesel engine in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare