StartTrailersPentti › PPV 2K

Pentti PPV 2K

Built: 1992-1992 · Series: Other models

More machines from model year 1992

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pentti PPV 2K is a machine built by Pentti. Production: 1992. The machine is 8,150 mm long and 2,600 mm wide. The unladen weight is 6,600 kg. The gross vehicle weight is 20,000 kg. Unladen weight across the Pentti range ranges from 6,600 to 9,400 kg; the PPV 2K sits at the bottom of that range with 6,600 kg. Its immediate neighbours are the VPV3E above it with 8,100 kg. 3 Pentti models are on record. The model is listed under Trailers. 5 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Length8,150 mmcorrect
Width2,600 mmcorrect
Unladen weight6,600 kgcorrect
Gross vehicle weight20,000 kgcorrect

Frequently asked questions

How much does the Pentti PPV 2K weigh?

The unladen weight is 6,600 kg.

What is the gross vehicle weight of the Pentti PPV 2K?

20,000 kg.

What are the dimensions of the Pentti PPV 2K?

8,150 mm × 2,600 mm.

When was the Pentti PPV 2K built?

Production years: 1992.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare