Pacton Trailers TTL.451
Built: 2023-2026 · Series: Other models
More machines from model year 2023
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pacton – other trailers: the collective page of semi-trailers from Werkendam outside the named ranges, from the AXD, AXC and AXZ codes through BXD, BXZ and LXD to MXA and DXX, 12 to 54 tonnes gross weight, curtainsider and platform bodies
This page gathers Pacton trailers the register could not assign to a named range. Pacton has built semi-trailers and trailers for European road haulage in Werkendam, the Netherlands, since the 1970s, mainly curtainsiders and platform or flatbed trailers for container and pallet traffic. The type codes such as AXD, AXC, AXZ, BXD, BXZ, LXD and MXA denote different axle counts and body variants at Pacton; the exact letter logic is not fully documented publicly by the maker, and the number after the letters usually indicates floor height or series. Most of the recorded models are three-axle trailers for use behind tractor units.
Read on 3 more paragraphs
The register lists here 195 versions with unladen weights from 2,490 to 17,530 kg, gross weights from 12,000 to 54,000 kg, lengths from 5,200 to 14,100 mm and widths from 2,450 to 2,600 mm.
Alongside Krone, Schmitz Cargobull and Kögel, Pacton is one of the established trailer makers of the Benelux region and is common in Dutch and German long-haul transport, where curtainsider trailers are the standard for general and palletised cargo thanks to side loading.
On used curtainsiders, the condition of the tarpaulin and roof bows counts; on all body types the frame and corrosion on the side members, axles, brakes and suspension (usually air) matter, along with the registration history regarding axle-load limits, and on tippers and special bodies the hydraulics and body itself; parts run through Pacton service and independent trailer workshops.
Sources: Kennwerte der Modelle Pacton Trailers (weitere Modelle), Pacton Trailers (Hersteller)
Technical data
Dimensions and weights
| Length | 13,710 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 10,080 mmcorrect |
| Unladen weight | 9,050 kgcorrect |
| Gross vehicle weight | 51,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Pacton Trailers TTL.451 weigh?
The unladen weight is 9,050 kg.
What is the gross vehicle weight of the Pacton Trailers TTL.451?
51,000 kg.
Up to what speed is the Pacton Trailers TTL.451 approved?
Approved up to 100 km/h.
What are the dimensions of the Pacton Trailers TTL.451?
13,710 mm × 2,550 mm.
When was the Pacton Trailers TTL.451 built?
Production years: 2023-2026.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.