Opel 1.6 CDTI 140HK
Built: 2014-2014 · Series: Vivaro
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Opel Vivaro – compact van since 2001: joint development with the Renault Trafic and Nissan Primastar, length and height variants, CDTI diesels from 1.6 to 2.5 litres, 2.7- to 3.1-tonne weight classes
The Vivaro emerged in 2001 as a joint project between General Motors, Renault and Nissan, sold in near-identical technical form as the Renault Trafic and Nissan Primastar, and built at the British plant in Luton. The second generation from 2014 remained Renault-based before the third generation switched, in 2019 after PSA Group's takeover of Opel, to the French EMP2 platform, which the Vivaro has since shared with the Peugeot Expert and Citroën Jumpy. Model designations with L1/L2 and H1/H2, as on the larger Movano, denote wheelbase and roof-height variants, with weight classes between 2.7 and 3.1 tonnes.
Read on 3 more paragraphs
The register lists 168 versions with power outputs from 60 to 107 kW, displacements from 1,598 to 2,464 cm³ and four cylinders. Unladen weights range from 1,635 to 2,720 kg, permissible gross weights from 2,150 to 3,100 kg, widths from 1,680 to 2,230 mm; length figures are only recorded for a smaller share of the models.
As a mid-size van, the Vivaro sits between the compact Combo and the large Movano, competing with the VW Transporter, the Ford Transit Custom and its technical siblings the Trafic and Primastar.
On the first and second generations, check the timing chain or timing belt depending on the engine code, the clutch pressure plate, rust on the sliding-door tracks and load sill, and turbocharger behaviour under load; on the third, PSA-based generation, additionally check particulate-filter regeneration in urban driving.
Sources: Kennwerte der Modelle Opel Vivaro, Opel Vivaro (Opel, Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,598 cm³correct |
Dimensions and weights
| Width | 1,960 mmcorrect |
|---|---|
| Wheelbase | 3,100 mmcorrect |
| Unladen weight | 1,831 kgcorrect |
| Gross vehicle weight | 3,010 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Opel 1.6 CDTI 140HK weigh?
The unladen weight is 1,831 kg.
What is the gross vehicle weight of the Opel 1.6 CDTI 140HK?
3,010 kg.
What engine does the Opel 1.6 CDTI 140HK have?
4 cylinders, 1,598 cm³ displacement.
When was the Opel 1.6 CDTI 140HK built?
Production years: 2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
, 1,6 CDTI 125HK KASSEVOGN
, 1,6 CDTI 145HK KASSEVOGN
1,6 120HK
1,6CDTI 125HK
1.,6 CDTI 145HK
1.6 CDTI 125HK
1.9DI 2.7T L1H1
1.9DI 2.7T L1H1 CREWCAB
1.9DI 2.7T L1H1 LIGHT
1.9DI 2.9T L1H1
1.9DI 2.9T L1H2
1.9DI 2.9T L2H1
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.