Start › Buckets › Olsen Attachments › OAGB-02

Olsen Attachments OAGB-02

Series: OAGB

Source: https://www.olsenattachments.co.nz/products/attachments/auge

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Olsen Attachments OAGB-02 belongs to the Buckets category. It is a bucket used for excavation and material handling. The equipment type is Grapple bucket. It fits carrier machines from 2 to 2.9 tonnes operating weight. The unladen weight is 130 kg. The working width is 340 mm. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The OAGB series covers 7 models. Unladen weight within it ranges from 100 to 1,170 kg; the OAGB-02 sits at the bottom of that range with 130 kg. Its immediate neighbours are the OAGB-01 below it with 100 kg and the OAGB-03 above it with 135 kg. 12 Olsen Attachments models across 5 series are on record. The model is listed under Buckets. 5 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight130correct

Working data

Working width340correct

Other data

Carrier max.2.9correct
Carrier min.2correct

Frequently asked questions

How much does the Olsen Attachments OAGB-02 weigh?

The unladen weight is 130 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

OAGB-01

OAGB-03

OAGB-05

OAGB-08

OAGB-12

OAGB-20

Sources: [1] [2]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare