Oliver 1255
Built: 1969-1971 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 1969-1971, the Oliver 1255 is a tractor from Oliver. It is powered by a three-cylinder engine producing 29 kW. Rated power is reached at 2,400 rpm.
Drive type: 2WD or MFWD.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 13 to 43 kW; with 29 kW, the 1255 sits in the mid-field. Directly alongside are the 77 with 28 kW below and the 600 with 30 kW above.
Technical data
Engine
| Engine make | Fiatcorrect |
|---|---|
| Engine model | 8,035correct |
| Fuel | dieselcorrect |
| Power | 39 hp (29 kW)correct |
| Rated speed | 2,400 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 142.8 cicorrect |
| Bore | 3.74 inchescorrect |
| Stroke | 4.33 inchescorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Italycorrect |
|---|
Frequently asked questions
How much power does the Oliver 1255 have?
The Oliver 1255 delivers 39 hp.
What engine does the Oliver 1255 have?
3 cylinders, diesel.
When was the Oliver 1255 built?
Production years: 1969-1971.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.