Obm HC 4700
Built: 2007-2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
OBM – other models: the collective page of mobile chippers, crushers and screening plants on trailer chassis outside the named ranges, TP 150 to TP 760, gross weight up to 44 tonnes
This page gathers the OBM trailers the register could not assign to a named range – consistently mobile chassis for mobile crushing and screening equipment, carrying chippers, crushers and screens from established brands such as Morbark, Finlay and Woodhog. The type designations from TP 150 to TP 760, along with the suffixes DHM, PHM and VHM, distinguish the machine's size and drive variant, while brand-specific names such as Morbark 10, Finlay 790 or Woodhog 4600 also appear for the underlying base machine.
Read on 3 more paragraphs
The register lists here 40 versions with unladen weights from 800 to 42,800 kg, gross weights from 850 to 44,000 kg, lengths from 6,530 to 13,360 mm and widths from 1,390 to 3,000 mm.
With gross weights from under one to over forty tonnes, the page covers the whole spectrum from the small green-waste chipper towable by car to the large mobile crusher or screening plant, as used in timber processing, recycling and earthworks; the heaviest versions are plants run in a static position and moved on their own chassis only when the site changes.
On a used machine, check the condition of the blades, hammers or crusher jaws, wear on conveyor belts and screens, engine and hydraulic-pump operating hours, the condition of the chassis including axles and brakes, and the tightness of the hydraulic lines; on electrically driven plants, also check the generator and cable connections. Parts run through the respective machine manufacturer.
Technical data
Dimensions and weights
| Length | 12,120 mmcorrect |
|---|---|
| Width | 2,980 mmcorrect |
| Wheelbase | 9,890 mmcorrect |
| Unladen weight | 31,180 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Obm HC 4700 weigh?
The unladen weight is 31,180 kg.
What is the gross vehicle weight of the Obm HC 4700?
36,000 kg.
Up to what speed is the Obm HC 4700 approved?
Approved up to 100 km/h.
What are the dimensions of the Obm HC 4700?
12,120 mm × 2,980 mm.
When was the Obm HC 4700 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.