Nissan PLU40
Series: Nissan Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a forklift truck, the Nissan PLU40 belongs to the Nissan Forklift series. Engine output is 45 kW. Rated power is reached at 2,700 rpm.
It will not go faster than 20 km/h — a working pace, not a travelling one. It carries 1,814 kg.
Within the range, rated power spans from 41 to 85 kW; with 45 kW, the PLU40 sits in the lower third. Directly alongside are the PLD70 with 44 kW below and the CLU50 with 46.9 kW above.
Technical data
Engine
| Power | 45 kWcorrect |
|---|---|
| Rated speed | 2,700 rpmcorrect |
Dimensions and weights
| Ground clearance | 154.9 mmcorrect |
|---|
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|---|
| Top speed | 19.5 km/hcorrect |
Working data
| Lifting capacity | 1,814.4 kgcorrect |
|---|
Other data
| Front wheels | 2correct |
|---|---|
| Kraftstoffart | Gas-LPGcorrect |
| Lift speed | 39.6 m/mincorrect |
| Load centre | 609.6 mmcorrect |
| Rear wheels | 2correct |
Frequently asked questions
How much power does the Nissan PLU40 have?
The Nissan PLU40 delivers 45 kW.
How fast does the Nissan PLU40 go?
Top speed is 19.5 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.