New Holland TN75FA 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The New Holland TN75FA is a tractor from the New Holland 4WD Tractor series. Power comes from a four-cylinder engine; from 3.9 litres it draws 73 hp (53.7 kW). Rated power arrives at 2,300 rpm — the engine pulls from low down rather than needing to be revved.
Unladen, it tips the scales at 2,817 kg.
Within the range, rated power spans from 18.8 to 622 hp; with 73 hp, the TN75FA sits in the lower third. Directly alongside are the TN70A with 71 hp below and the NH 640 with 76 hp above.
Technical data
Engine
| Power | 73 hp (53.7 kW)correct |
|---|---|
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,900.1 cm³correct |
| Aspiration | Naturalcorrect |
Dimensions and weights
| Unladen weight | 2,817 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | Synchro Commandcorrect |
|---|---|
| Forward gears | 16correct |
| Reverse gears | 16correct |
| Tyre size | Rear 380/70R24correct |
| System voltage | 12 Vcorrect |
Working data
| Pump flow | 46.9 l/mincorrect |
|---|---|
| Hydraulic pressure | 190correct |
| Fuel tank capacity | 16.3 lcorrect |
Other data
| Height | 2,356.1correct |
|---|
Where this model stands
Power-to-weight ratio: 19.1 kW/t (54 kW / 2.8 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the New Holland TN75FA have?
The New Holland TN75FA delivers 73 hp.
How much does the New Holland TN75FA weigh?
The unladen weight is 2,817 kg.
What engine does the New Holland TN75FA have?
4 cylinders, 3,900 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
110-90 DT
110-90 DT 4X4/2450
155 TM
165 TM
165 TM 4WD
180-90
285
5010
5030
50C Special
54C 2000 Special
54C Junior
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.