StartTractorsNew Holland › TN70A

New Holland TN70A 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland TN70A is a tractor from the New Holland 4WD Tractor series. Power comes from a three-cylinder engine; from 2.9 litres it draws 71 hp (52.2 kW). Rated speed is 2,300 rpm.

Within the range, rated power spans from 18.8 to 622 hp; with 71 hp, the TN70A sits in the lower third. Directly alongside are the NH Ghazi with 65.9 hp below and the TD80D with 73 hp above.

Technical data

Engine

Power71 hp (52.2 kW)correct
Rated speed2,300 rpmcorrect
Cylinders3correct
Displacement2,900.5 cm³correct
Aspirationturbochargedcorrect

Drivetrain and chassis

Gearbox type8x8 constant-mesh gearbox transmission with synchromesh gearbox mechanical gearbox shuttlecorrect
Tyre sizefront: 11.2x20, rear 14.9x28correct

Working data

Pump flow48.1 l/mincorrect
Hydraulic pressure190correct
Fuel tank capacity87.1 lcorrect

Frequently asked questions

How much power does the New Holland TN70A have?

The New Holland TN70A delivers 71 hp.

What engine does the New Holland TN70A have?

3 cylinders, 2,900 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare