StartTractorsNew Holland › TC45

New Holland TC45 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the New Holland TC45 belongs to the New Holland 4WD Tractor series. Under the bonnet works a four-cylinder engine displacing 2.2 litres, producing 46 hp (33.6 kW). With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.

At 24 km/h, that is as fast as it goes. Empty, it weighs 1,519 kg.

Within the range, rated power spans from 18.8 to 622 hp; with 45.6 hp, the TC45 sits at the bottom end. Directly alongside are the TC40D with 40.6 hp below and the NH 480 with 55.8 hp above.

Technical data

Engine

Power45.6 hp (33.6 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,215.5 cm³correct

Dimensions and weights

Length3,180 mmcorrect
Ground clearance356.1correct
Unladen weight1,519.1 kgcorrect

Drivetrain and chassis

Gearbox typemanual gearboxcorrect
Forward gears12correct
Reverse gears12correct
Tyre sizeFront 7x16, Rear 13.6x24correct
Top speed23.8 km/hcorrect
Turning radius2,800 mmcorrect

Working data

Lifting capacity1,057 kgcorrect
Pump flow56.4 l/mincorrect
Fuel tank capacity49.2 lcorrect
PTO output40 hpcorrect

Other data

Cab height2,414correct

Where this model stands

Power-to-weight ratio: 22.1 kW/t (34 kW / 1.5 t)

Power class: Universal (40–100 hp)

Stronger than 31% of the tractors in the register — out of 15,105 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland TC45 have?

The New Holland TC45 delivers 45.6 hp.

How much does the New Holland TC45 weigh?

The unladen weight is 1,519 kg.

What engine does the New Holland TC45 have?

4 cylinders, 2,216 cm³ displacement.

How fast does the New Holland TC45 go?

Top speed is 23.8 km/h.

What is the PTO output of the New Holland TC45?

PTO output is 40 hp.

How much does the rear linkage of the New Holland TC45 lift?

The rear linkage lifts 1,057 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare