StartTractorsNew Holland › T4030

New Holland T4030 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the New Holland T4030 belongs to the New Holland 4WD Tractor series. Under the bonnet works a four-cylinder engine displacing 3.2 litres, producing 77 hp (56.7 kW). Rated power is reached at 2,300 rpm.

Top speed is 38 km/h.

Within the range, rated power spans from 18.8 to 622 hp; with 77.1 hp, the T4030 sits in the lower third. Directly alongside are the TT75A with 76 hp below and the TK80A with 78.1 hp above.

Technical data

Engine

Engine modelF5Ccorrect
Power77.1 hp (56.7 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement3,200.4 cm³correct
Aspirationturbocharged air to air intercooledcorrect

Dimensions and weights

Length3,440 mmcorrect

Drivetrain and chassis

Gearbox type16FX16R Synchro Command transmission with mechanical gearbox shuttle or clutcheless powecorrect
Forward gears16correct
Reverse gears16correct
Tyre sizeFront 12.4R20, Rear 16.9x28R1correct
Top speed37.8 km/hcorrect

Working data

Lifting capacity1,800 kgcorrect
Pump flow84 l/mincorrect
Hydraulic pressure190correct
Fuel tank capacity82.1 lcorrect

Other data

Cab height2,322.6correct
PTO output62 hpcorrect
System voltage12 Vcorrect

More machines with this engine (Iveco F5C, 8)

Frequently asked questions

How much power does the New Holland T4030 have?

The New Holland T4030 delivers 77.1 hp.

What engine does the New Holland T4030 have?

4 cylinders, 3,200 cm³ displacement.

How fast does the New Holland T4030 go?

Top speed is 37.8 km/h.

What is the PTO output of the New Holland T4030?

PTO output is 62 hp.

How much does the rear linkage of the New Holland T4030 lift?

The rear linkage lifts 1,800 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare