New Holland HW345

Series: New Holland Swather

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland Swather series from New Holland includes the HW345. The engine has 6 cylinders, with a displacement of 7,472.5 cm³. Rated speed is 2,100 rpm. Ground clearance is 922 mm. Top speed is 29 km/h. The tank holds 454.2 litres. The electrical system runs on 24 V. 502 New Holland models across 32 series are on record. The model is listed under Harvesting machinery. 10 verified figures from 1 source are on file.

Technical data

Engine

Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement7,472.5 cm³correct
AspirationTurbocharged with air-to-air intercoolercorrect

Dimensions and weights

Ground clearance922correct

Drivetrain and chassis

Gearbox type2-speed hydrostatic transmissioncorrect
Top speed29 km/hcorrect
System voltage24 Vcorrect

Working data

Fuel tank capacity454.2 lcorrect

Other data

Height3,432correct

Frequently asked questions

What engine does the New Holland HW345 have?

6 cylinders, 7,472 cm³ displacement.

How fast does the New Holland HW345 go?

Top speed is 29 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare