Technical register for agricultural, construction and commercial machinery · sourced data
Start › Mini excavators › New Holland › EH15.B

New Holland EH15.B

Series: New Holland Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland Mini Excavator series from New Holland includes the EH15.B. The engine delivers 12.1 hp (8.9 kW), has 3 cylinders, with a displacement of 784.9 cm³. Rated speed is 2,000 rpm. The unladen weight is 1,470 kg. Ground clearance is 182.9 mm. The tank holds 15.1 litres. The pump delivers 9.5 l/min. The hydraulic tank holds 17 litres. Working pressure is 206 bar. The electrical system runs on 12 V. The engine fitted is the 3TNE68-YB. The New Holland Mini Excavator series covers 21 models. Rated output within it ranges from 12.1 to 28.8 hp; the EH15.B sits at the bottom of that range with 12.1 hp. Its immediate neighbours are the E18SR above it with 15.4 hp. Rated output within it ranges from 8.9 to 21.2 kW; here the EH15.B sits at the bottom of that range with 8.9 kW. 1448 New Holland models across 71 series are on record.

New Holland mini excavators EH15 to EH35, E9SR to E40.2SR and E18B to E35 – three origins: Fiat-Hitachi, the Kobelco alliance and the own E series, 6 to 32 kW

New Holland's mini excavators bear the traces of three partnerships, and the type designations sort them. The EH models (EH15.B, EH27.B, EH30.B, EH35.B) come from the Fiat-Hitachi era of the 1990s, when the group built excavators together with Hitachi – the number gives the weight class in hundreds of kilograms. The E-SR models (E9SR to E40.2SR) come from the alliance with Kobelco from 2002 to 2012: SR stands for Short Radius, the short-tail excavator, .2 for the second generation. The E models without SR (E15, E16, E18, E18B, E27, E27B, E30, E35) are the range New Holland continued under its own management after the alliance ended. The EC240 in the register is a 24-tonne excavator that the sorting placed here.

Read on 3 more paragraphs

The register lists 21 versions; the minis run from 6 to about 30 kW from two- to four-cylinders of 523 to 2,200 cm³ – Yanmar 3TNE68, 3TNE74, 3TNV82 and 3TNV88, Mitsubishi L3E in the smallest model – at rated speeds of 2,000 to 2,400 rpm and operating weights from 1,060 to 4,440 kg.

The Kobelco era brought the short tail as standard and the cabs that still shape New Holland today; the sister models ran at Case as the CX-B range, as the identical Yanmar engines in both register rows show.

On used machines, operating hours, play in boom and stick pins, the condition of undercarriage and rubber tracks, leak-free cylinders and swivel joint and parts supply, which for the SR models runs through CNH and Kobelco part numbers, are what count.

Sources: Kennwerte der Modelle New Holland Minibagger, New Holland Construction (Hersteller)

Technical data

Engine

Engine model3TNE68-YBcorrect
Power12.1 hp (8.9 kW)correct
Rated speed2,000 rpmcorrect
Cylinders3correct
Displacement784.9 cm³correct

Dimensions and weights

Ground clearance182.9correct
Unladen weight1,470 kgcorrect

Working data

Pump flow9.5 l/mincorrect
Hydraulic oil capacity17 lcorrect
Hydraulic pressure206 barcorrect
Fuel tank capacity15.1 lcorrect

Other data

Cab height2,502.4correct
System voltage12 Vcorrect

More machines with this engine (3TNE68-YB, 2)

Where this model stands

Power-to-weight ratio: 6.1 kW/t (9 kW / 1.5 t)

Stronger than 4% of the mini excavators in the register — out of 400 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland EH15.B have?

The New Holland EH15.B delivers 12.1 hp.

How much does the New Holland EH15.B weigh?

The unladen weight is 1,470 kg.

What engine does the New Holland EH15.B have?

3 cylinders, 785 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare