StartMining equipmentNew Holland › D95 WT

New Holland D95 WT Crawler

Series: Pozostałe modele

The photo shows the D85B LT from the same series. Source: https://www.ritchielist.com/construction/dozers-crawler-doze

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the D95 WT, New Holland offers a model from the New Holland Crawler Tractor series. The engine delivers 100.4 hp (71.6 kW), has 6 cylinders, with a displacement of 6,700.7 cm³. Torque is 441 Nm. Rated speed is 2,000 rpm. The unladen weight is 9,163 kg. Ground clearance is 381 mm. The tank holds 189.6 litres. The gearbox has 10 forward gears. Maximum torque is reached at 1,200 rpm. The pump delivers 76.8 l/min. The cooling system holds 18.9 litres. The oil fill is 15.9 litres. The electrical system runs on 12 V. The engine fitted is the 667T/M2. The New Holland Crawler Tractor series covers 39 models. Rated output within it ranges from 71 to 182.5 hp; the D95 WT sits in the lower part of that range with 100.4 hp. Its immediate neighbours are the D85B WT below it with 91.2 hp and the DC100 above it with 101.4 hp. 502 New Holland models across 32 series are on record. The model is listed under Mining equipment. 19 verified figures from 1 source are on file.

Technical data

Engine

Engine model667T/M2correct
Power100.4 hp (71.6 kW)correct
Rated speed2,000 rpmcorrect
Torque441correct
Speed at max. torque1,200 rpmcorrect
Cylinders6correct
Displacement6,700.7 cm³correct
AspirationNaturalcorrect
Coolant capacity18.9 lcorrect
Engine oil capacity15.9 lcorrect

Dimensions and weights

Ground clearance381correct
Unladen weight9,163 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears10correct
System voltage12 Vcorrect

Working data

Pump flow76.8 l/mincorrect
Fuel tank capacity189.6 lcorrect

Other data

Height2,773.7correct

Where this model stands

Power-to-weight ratio: 7.8 kW/t (72 kW / 9.2 t)

Stronger than 30% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland D95 WT have?

The New Holland D95 WT delivers 100 hp.

How much does the New Holland D95 WT weigh?

The unladen weight is 9,163 kg.

What engine does the New Holland D95 WT have?

6 cylinders, 6,701 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare