New Holland (CNH) CR9060
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The New Holland (cnh) CR9060 is a Combines made by New Holland (cnh). It is powered by a six-cylinder engine producing 216.3 kW.
Within the range, rated power spans from 216 to 276 kW; with 216 kW, the CR9060 sits at the bottom end. The next one up is the CX840 with 220 kW.
Technical data
Engine
| Engine model | Cursor 9correct |
|---|---|
| Power | 216.3 kWcorrect |
| Cylinders | 6correct |
Drivetrain and chassis
| Gearbox type | hydraulic transmissioncorrect |
|---|
Working data
| Fuel tank capacity | 2,839.1 lcorrect |
|---|
More machines with this engine (Cursor 9, 2)
Frequently asked questions
How much power does the New Holland (CNH) CR9060 have?
The New Holland (CNH) CR9060 delivers 216 kW.
What engine does the New Holland (CNH) CR9060 have?
6 cylinders.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.