Start › Excavators & compaction › Nagano › NS55

Nagano NS55

Series: Nagano Midi Excavator

Source: https://www.truck1.eu/tractor-units/scania/r/from-czech-repu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Nagano NS55 is a model in the Nagano Midi Excavator series. The engine delivers 43.8 hp (32.2 kW), has 4 cylinders, with a displacement of 2,435.1 cm³. Rated speed is 2,400 rpm. The unladen weight is 5,350 kg. The pump delivers 60.2 l/min. Rated output across the Nagano range ranges from 7.5 to 43.8 hp; the NS55 sits at the top of that range with 43.8 hp. Its immediate neighbours are the NS35R below it with 27.1 hp. 10 Nagano models across 2 series are on record. The model is listed under Excavators & compaction. 7 verified figures from 1 source are on file.

Technical data

Engine

Power	43.8 hp (32.2 kW)correct
Rated speed	2,400 rpmcorrect
Cylinders	4correct
Displacement	2,435.1 cm³correct

Dimensions and weights

Unladen weight	5,350 kgcorrect

Working data

Pump flow	60.2 l/mincorrect

Where this model stands

Power-to-weight ratio: 6 kW/t (32 kW / 5.3 t)

Stronger than 5% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Nagano NS55 have?

The Nagano NS55 delivers 43.8 hp.

How much does the Nagano NS55 weigh?

The unladen weight is 5,350 kg.

What engine does the Nagano NS55 have?

4 cylinders, 2,435 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →