Start › Trucks over 7.5 t › Mitsubishi Fuso › CANTER-FE85SJ/4470

Mitsubishi Fuso CANTER-FE85SJ/4470

Built: 2011-2011 · Series: Other models

Source: https://www.truck1.eu/leasing/trucks/mitsubishi/from-hungary

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CANTER-FE85SJ/4470 comes from Mitsubishi Fuso. Production: 2011. The engine delivers 107 kW, has 4 cylinders, with a displacement of 2,998 cm³. The machine is 7,785 mm long and 2,270 mm wide. The unladen weight is 4,930 kg. The gross vehicle weight is 7,500 kg. The gearbox offers 6 gears. Rated output across the Mitsubishi Fuso range ranges from 92 to 132 kW; the CANTER-FE85SJ/4470 sits in the lower part of that range with 107 kW. Its immediate neighbours are the FUSO CANTER FE84/6 below it with 105 kW and the CANTER 6S15 above it with 110 kW. 104 Mitsubishi Fuso models across 22 series are on record. The model is listed under Trucks over 7.5 t. 9 verified figures from 1 source are on file.

Technical data

Engine

Power107 kWcorrect
Cylinders4correct
Displacement2,998 cm³correct

Dimensions and weights

Length7,785 mmcorrect
Width2,270 mmcorrect
Unladen weight4,930 kgcorrect
Gross vehicle weight7,500 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 21.7 kW/t (107 kW / 4.9 t)

Stronger than 10% of the trucks over 7.5 t in the register — out of 27,962 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mitsubishi Fuso CANTER-FE85SJ/4470 have?

The Mitsubishi Fuso CANTER-FE85SJ/4470 delivers 107 kW.

How much does the Mitsubishi Fuso CANTER-FE85SJ/4470 weigh?

The unladen weight is 4,930 kg.

What is the gross vehicle weight of the Mitsubishi Fuso CANTER-FE85SJ/4470?

7,500 kg.

What engine does the Mitsubishi Fuso CANTER-FE85SJ/4470 have?

4 cylinders, 2,998 cm³ displacement.

What are the dimensions of the Mitsubishi Fuso CANTER-FE85SJ/4470?

7,785 mm × 2,270 mm.

When was the Mitsubishi Fuso CANTER-FE85SJ/4470 built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Avolavakuorma-auto (BA) 2ov 2970cm3

Avolavakuorma-auto (BA) 2ov 2977cm3

Avolavakuorma-auto (BA) 2ov 2998cm3

CANTER-FB83BE/335

CANTER-FE74SE/3350

CANTER-FE84BE/335

CANTER-FE84BE/3350

CANTER-FE84BG/385

CANTER-FE84PG/385

CANTER-FE84SE/3350

CANTER-FE84SG/3850

CANTER-FE85/335

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare