Mitsubishi BD2H-E-S-HB1 Crawler
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mitsubishi – other models: compact BD2 crawler dozers outside the named types, 27.6 to 37.3 kW, S4 diesel engines, from the construction machinery arm of Mitsubishi Heavy Industries
This page brings together Mitsubishi models outside the named ranges – exclusively compact crawler dozers of the BD2 series in their F, G, H and J versions. Mitsubishi Heavy Industries built small and medium crawler dozers under the BD line for decades for the Asian and international market; the engines come consistently from the in-house S4 diesel series (S4E, S4E2, S4S, S4SE1), which Mitsubishi also uses in excavators, forklifts and other construction machinery.
Read on 3 more paragraphs
The register lists 37 versions here with 27.6 to 37.3 kW from engines of 2,610 to 3,332 cm³ displacement and operating weights of 3,480 to 4,850 kg.
The BD2 series occupies the compact crawler dozer segment for smaller earthmoving, forestry and off-road work, where it competes with similarly sized models from Komatsu and Caterpillar; after the formation of the Shin Caterpillar Mitsubishi joint venture, the construction machinery division was gradually folded into today's Caterpillar manufacturing in Japan.
When buying used, these compact dozers call for checking wear on track rollers and track tension, the condition of blade hydraulics and tilt cylinders, and the tightness of the S4 engines at the cylinder head and injection pump; parts today mostly flow through Caterpillar Japan channels, since Mitsubishi's standalone construction machinery division was absorbed into that joint venture.
Technical data
Engine
| Engine model | C S4SE1correct |
|---|---|
| Power | 40.6 hp (29.8 kW)correct |
| Displacement | 3,331.5 cm³correct |
Dimensions and weights
| Ground clearance | 292.6correct |
|---|---|
| Unladen weight | 3,890 kgcorrect |
Drivetrain and chassis
| Gearbox type | DDcorrect |
|---|---|
| Forward gears | 3correct |
| Reverse gears | 2correct |
Other data
| Cab height | 2,337.8correct |
|---|
More machines with this engine (C S4SE1, 10)
Where this model stands
Power-to-weight ratio: 7.7 kW/t (30 kW / 3.9 t)
Stronger than 1% of the mining equipment in the register — out of 944 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mitsubishi BD2H-E-S-HB1 have?
The Mitsubishi BD2H-E-S-HB1 delivers 40.6 hp.
How much does the Mitsubishi BD2H-E-S-HB1 weigh?
The unladen weight is 3,890 kg.
What engine does the Mitsubishi BD2H-E-S-HB1 have?
3,332 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
BD2F-1B0
BD2F-1B5
BD2FS-1B6
BD2FSS-1B2
BD2FSS-1B7
BD2G-2-2B0
BD2G-2-2B5
BD2G-2B0
BD2G-2B5
BD2GS-2-2B1
BD2GS-2-2B6
BD2GS-2B1
Sources: [1]
Dump truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.