Technical register for agricultural, construction and commercial machinery · sourced data

Mercedes Benz 8x4

Built: 2015-2025 · Series: Arocs

More machines from model year 2015

The Mercedes Benz 8x4 belongs to the Arocs series. Production: 2015-2025. The engine delivers 425 kW, has 6 cylinders, with a displacement of 15,569 cm³. The machine is 10,000 mm long and 2,550 mm wide. The unladen weight is 16,930 kg. The wheelbase measures 6,600 mm. Top speed is 90 km/h. The gross vehicle weight is 34,500 kg. The machine runs on 12 wheels. The gearbox offers 12 gears. The Arocs series covers 126 models. Rated output within it ranges from 265 to 460 kW; the 8x4 sits in the upper part of that range with 425 kW. Its immediate neighbours are the 3253L below it with 390 kW and the Arocs 3263 above it with 460 kW. Unladen weight within it ranges from 9,459 to 61,500 kg; here the 8x4 sits at the bottom of that range with 16,930 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Arocs – Mercedes-Benz Trucks' construction range from Wörth am Rhein since 2013: L, K and LK as chassis variants, engine outputs of 265 to 460 kW, displacements of 10.7 to 15.6 litres

The Arocs is Mercedes-Benz Trucks' construction and heavy-haulage range, introduced in 2013 as a standalone line alongside the Actros and Antos and built at the Wörth am Rhein plant; it took over the previous construction variants of the Actros for tippers, mixers and crane chassis. In the type designation the first digits denote weight class and engine power, the letters the chassis variant: L the standard version, K the tipper, LK a combination of both, B a construction all-wheel-drive variant.

Read on 3 more paragraphs

The register lists 126 versions with engine outputs of 265 to 460 kW, displacements of 10,677 to 15,569 cm³ and six to eight cylinders.

The Arocs covers Mercedes-Benz Trucks' construction segment and competes chiefly with the MAN TGS, the Scania XT and the Volvo FMX; its domain is tippers, concrete mixers, crane and hook-lift vehicles with reinforced frames and a low-range gearbox for construction-site use off made-up roads. Unlike its long-haul sister the Actros, the Arocs is designed for short wheelbases, high ground clearance and a wide range of axle configurations from 6x2 to 10x8, as also seen in the model line-up from 8x4 tippers to 10x8 special chassis.

On a used example, what counts is the condition of the frame and tipper hydraulics, wear on differential locks and the low-range gearbox, corrosion on axles and body mounting points, the condition of the engine and exhaust after-treatment, and parts supply through Mercedes-Benz's dense workshop network.

Sources: Kennwerte der Modelle Mercedes-Benz Arocs, Mercedes-Benz Trucks (Daimler Truck, Hersteller)

Technical data

Engine

Power425 kWcorrect
Cylinders6correct
Displacement15,569 cm³correct

Dimensions and weights

Length10,000 mmcorrect
Width2,550 mmcorrect
Wheelbase6,600 mmcorrect
Unladen weight16,930 kgcorrect
Gross vehicle weight34,500 kgcorrect

Drivetrain and chassis

Gears12correct
Wheels12correct
Top speed90 km/hcorrect

Where this model stands

Power-to-weight ratio: 25.1 kW/t (425 kW / 16.9 t)

Stronger than 93% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 8x4 have?

The Mercedes Benz 8x4 delivers 425 kW.

How much does the Mercedes Benz 8x4 weigh?

The unladen weight is 16,930 kg.

What is the gross vehicle weight of the Mercedes Benz 8x4?

34,500 kg.

What engine does the Mercedes Benz 8x4 have?

6 cylinders, 15,569 cm³ displacement.

How fast does the Mercedes Benz 8x4 go?

Top speed is 90 km/h.

What are the dimensions of the Mercedes Benz 8x4?

10,000 mm × 2,550 mm.

When was the Mercedes Benz 8x4 built?

Production years: 2015-2025.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare