Mechtric MS90S-2
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mechtric – other models: the collective page of MEPS-registered three-phase motors outside the named ranges, frame sizes 80 to 315, 0.75 to 132 kW, 2- to 8-pole, 415 V
This page gathers the three-phase motors carried in the Australian energy-efficiency register under the Mechtric brand, which the register does not assign to a named range. No reliable information is available on Mechtric's headquarters or group ownership. The model list shows two parallel designation schemes: the MS code with frame size and pole count (e.g. MS100L-2) and the WE code (e.g. WE132M-4), which could indicate two parallel product lines or designations taken over from a supplier; nothing further can be established from the dump.
Read on 3 more paragraphs
The register lists here 93 versions with 0.75 to 132 kW, two- to eight-pole, all rated for 415 V. Full-load efficiencies run between 68.4 and 95.79%, and at 75% load between 60.9 and 95.74% — a comparatively wide range spanning small eight-pole units up to large two-pole ones. All 93 motors are built to protection rating IP55, frame sizes run from 80 to 315 under IEC, manufactured consistently in China. Testing followed mostly the older 2000 Legacy standard, a smaller share the 2012 GEMS determinations, with test method A. None of the 93 motors is classified under the Australian High Efficiency Level. Mounting codes range from a broad combination of foot and flange forms to the vertical forms V1 to V19.
The page thus covers a broad IEC standard-motor programme without particular efficiency certification, of the kind common in the spares and retrofit trade for older industrial plant; the wide spread of pole counts and frame sizes points to a full-line catalogue programme.
When buying used, what matters is bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, the condition of shaft and key, and a legible nameplate with frame size, pole count and efficiency class; since none of the motors carries a High Efficiency Level certification, for energy-intensive continuous duty it is worth comparing against IE2/IE3 alternatives. Spares depend on the distribution channel.
Sources: Kennwerte der Modelle Mechtric (weitere Modelle, MEPS-Registrierungen)
Technical data
Engine
| Rated output | 1.5 kWcorrect |
|---|
Dimensions and weights
| Weight | 12 kgcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 2correct |
| Protection class | IP55correct |
| Frame size | 90 S (foot)correct |
| Mounting (IEC 60034-7) | B3, B5, B14, V5, B6, B7, B8, V6, V1, V3, V18, V19, B35, B34, V15, B35, B34correct |
| Efficiency at full load | 78.5 %correct |
| Efficiency at 75 % load | 77 %correct |
| Efficiency at half load | 70 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | AS/NZS 1359.5:2000 (Legacy)correct |
|---|---|
| Test method | AS/NZS 1359.102.3:2000correct |
Frequently asked questions
How much power does the Mechtric MS90S-2 have?
The Mechtric MS90S-2 delivers 1.5 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
MS100L-2
MS100L-6
MS100L1-4
MS100L1-8
MS100L2-4
MS100L2-8
MS112M-2
MS112M-4
MS112M-6
MS112M-8
MS132S-4
MS801-2
Sources: [1]
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.