StartTractorsMcCormick › CX95

McCormick CX95 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The McCormick CX95 is a tractor from the McCormick 4WD Tractor series. Power comes from a four-cylinder engine; from 4.4 litres it draws 91 hp (67.1 kW). Rated power arrives at 2,200 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 40 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 3,770 kg.

Within the range, rated power spans from 28.4 to 194 hp; with 91.2 hp, the CX95 sits in the mid-field. Directly alongside are the MC95 with 90.4 hp below and the C95 Max with 93.2 hp above.

Technical data

Engine

Power91.2 hp (67.1 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,401.6 cm³correct
Aspirationwastegate turbochargercorrect

Dimensions and weights

Unladen weight3,770 kgcorrect

Drivetrain and chassis

Gearbox typextrashift powershift transmission/power shuttlecorrect
Forward gears24correct
Reverse gears24correct
Tyre sizefront 12.4R24 rear 16.9R34correct
Top speed40.1 km/hcorrect

Working data

Pump flow60.2 l/mincorrect
Hydraulic oil capacity37.1 lcorrect
Fuel tank capacity155.2 lcorrect

Other data

Height2,542correct

Where this model stands

Power-to-weight ratio: 17.8 kW/t (67 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 63% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the McCormick CX95 have?

The McCormick CX95 delivers 91.2 hp.

How much does the McCormick CX95 weigh?

The unladen weight is 3,770 kg.

What engine does the McCormick CX95 have?

4 cylinders, 4,402 cm³ displacement.

How fast does the McCormick CX95 go?

Top speed is 40.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare