McCormick CX75 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The McCormick CX75 is a tractor from the McCormick 4WD Tractor series. Power comes from a four-cylinder engine; from 4.4 litres it draws 74 hp (54.4 kW). Rated output is reached at 2,200 rpm, so it works in the lower rev range.
Top speed is 40 km/h. Unladen weight is 3,770 kg.
Within the range, rated power spans from 28.4 to 194 hp; with 74 hp, the CX75 sits in the lower third. Directly alongside are the CX65-LC with 70 hp below and the CX75-L with 77.1 hp above.
Technical data
Engine
| Power | 74 hp (54.4 kW)correct |
|---|---|
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,401.6 cm³correct |
Dimensions and weights
| Unladen weight | 3,770 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | xtrashift powershift transmission/power shuttlecorrect |
|---|---|
| Forward gears | 24correct |
| Reverse gears | 24correct |
| Tyre size | front 11.2R24 rear 13.6R36correct |
| Top speed | 40.1 km/hcorrect |
Working data
| Pump flow | 60.2 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 37.1 lcorrect |
| Fuel tank capacity | 155.2 lcorrect |
Other data
| Height | 2,542correct |
|---|
Where this model stands
Power-to-weight ratio: 14.4 kW/t (54 kW / 3.8 t)
Power class: Universal (40–100 hp)
Stronger than 52% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the McCormick CX75 have?
The McCormick CX75 delivers 74 hp.
How much does the McCormick CX75 weigh?
The unladen weight is 3,770 kg.
What engine does the McCormick CX75 have?
4 cylinders, 4,402 cm³ displacement.
How fast does the McCormick CX75 go?
Top speed is 40.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.