StartRoad constructionMauldin › 4700

Mauldin 4700

Series: Mauldin Pneumatic Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 4700 from Mauldin is part of the Mauldin Pneumatic Roller series. The engine delivers 13.4 kW, has 2 cylinders. The machine is 990.6 mm wide. The wheelbase measures 1,435.6 mm. Top speed is 9.7 km/h. The tank holds 13.2 litres. The hydraulic tank holds 30.3 litres. The electrical system runs on 12 V. Rated output across the Mauldin range ranges from 13.4 to 59.7 kW; the 4700 sits at the bottom of that range with 13.4 kW. Its immediate neighbours are the 1550C above it with 44.7 kW. 8 Mauldin models across 4 series are on record. The model is listed under Road construction. 9 verified figures from 1 source are on file.

Technical data

Engine

Power13.4 kWcorrect
Cylinders2correct
Aspirationnaturalcorrect

Dimensions and weights

Width990.6correct
Wheelbase1,435.6correct

Drivetrain and chassis

Top speed9.7 km/hcorrect
System voltage12 Vcorrect

Working data

Hydraulic oil capacity30.3 lcorrect
Fuel tank capacity13.2 lcorrect

Frequently asked questions

How much power does the Mauldin 4700 have?

The Mauldin 4700 delivers 13.4 kW.

What engine does the Mauldin 4700 have?

2 cylinders.

How fast does the Mauldin 4700 go?

Top speed is 9.7 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare