Massey Ferguson 3625 2WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Massey Ferguson 3625 is a tractor from the Massey Ferguson 2WD Tractor series. The engine draws 69 hp (50.7 kW) from 328 cm³. Rated speed is 2,200 rpm.
It is 1.93 m wide. Unladen weight is 2,300 kg.
Within the range, rated power spans from 59.9 to 132 hp; with 68.9 hp, the 3625 sits in the lower third. Directly alongside are the MF 425 with 65.9 hp below and the 573 with 73 hp above.
Technical data
Engine
| Engine model | 33 DTcorrect |
|---|---|
| Power | 68.9 hp (50.7 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Displacement | 327.7 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Length | 3,760 mmcorrect |
|---|---|
| Width | 1,932.4correct |
| Wheelbase | 2,081.8correct |
| Unladen weight | 2,300.2 kgcorrect |
Drivetrain and chassis
| Forward gears | 8correct |
|---|---|
| Reverse gears | 8correct |
Working data
| Lifting capacity | 2,502 kgcorrect |
|---|---|
| Pump flow | 84.8 l/mincorrect |
| Fuel tank capacity | 109.8 lcorrect |
| PTO output | 55 hpcorrect |
Where this model stands
Power-to-weight ratio: 22 kW/t (51 kW / 2.3 t)
Power class: Universal (40–100 hp)
Stronger than 49% of the tractors in the register — out of 15,105 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Massey Ferguson 3625 have?
The Massey Ferguson 3625 delivers 68.9 hp.
How much does the Massey Ferguson 3625 weigh?
The unladen weight is 2,300 kg.
What engine does the Massey Ferguson 3625 have?
328 cm³ displacement.
What is the PTO output of the Massey Ferguson 3625?
PTO output is 55 hp.
How much does the rear linkage of the Massey Ferguson 3625 lift?
The rear linkage lifts 2,502 kg.
What are the dimensions of the Massey Ferguson 3625?
3,760 mm × 1,932 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.