Massey Ferguson 2607H Utility
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Massey Ferguson 2607H belongs to the Massey Ferguson Utility Tractor series. 75 hp (55.2 kW) is what the three-cylinder engine gets out of 2.6 litres. Rated power is reached at 2,000 rpm.
Dimensions are 3.53 m by 1.85 m. Wheelbase is 2.05 m.
Within the range, rated power spans from 39 to 101 hp; with 75 hp, the 2607H sits in the upper third. Directly alongside are the 4607M with 71.1 hp below and the 4608 with 81.1 hp above.
Technical data
Engine
| Engine make | Simpsoncorrect |
|---|---|
| Engine model | 2607Hcorrect |
| Power | 75 hp (55.2 kW)correct |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,600.6 cm³correct |
| Aspiration | Naturalcorrect |
Dimensions and weights
| Length | 3,526correct |
|---|---|
| Width | 1,853.2correct |
| Wheelbase | 2,051.3correct |
Drivetrain and chassis
| Forward gears | 8correct |
|---|---|
| Reverse gears | 8correct |
Working data
| Pump flow | 59.8 l/mincorrect |
|---|---|
| Fuel tank capacity | 55.3 lcorrect |
Frequently asked questions
How much power does the Massey Ferguson 2607H have?
The Massey Ferguson 2607H delivers 75 hp.
What engine does the Massey Ferguson 2607H have?
3 cylinders, 2,601 cm³ displacement.
What are the dimensions of the Massey Ferguson 2607H?
3,526 mm × 1,853 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.