Start › Electric motors › Marathon › 200LTFC0372E3

Marathon 200LTFC0372E3

Series: Other models

Source: https://www.kleinanzeigen.de/s-anzeige/mietservice-bei-der-m

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Marathon 200LTFC0372E3 is a three-phase induction motor. The rated output is 37 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 415 V. The housing is frame size 280 L in foot-mounted form. The protection class is IP55. The efficiency is 93.8 per cent at full load, 93.6 per cent at 75 per cent load and 91.7 per cent at half load. Mounting arrangements to IEC 60034-7: B3, B5, B35, V1, B14 and B34. The motor is built in China. The values are recorded in the Australian MEPS registration under standard AS/NZS 1359.5:2004; measured to AS/NZS 1359.102.3:2000. Rated output across the Marathon range ranges from 0.75 to 160 kW; the 200LTFC0372E3 sits in the lower part of that range with 37 kW. Its immediate neighbours are the XGA225M6 below it with 30 kW and the 225MTFC0452-AU above it with 45 kW. 498 Marathon models across 2 series are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output37 kWcorrect

Electrical data

Rated voltage415 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size280 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B35, V1, B14, B34correct
Efficiency at full load93.8 %correct
Efficiency at 75 % load93.6 %correct
Efficiency at half load91.7 %correct

Origin and approval

Country of manufactureChinacorrect
Standard appliedAS/NZS 1359.5:2004correct
Test methodAS/NZS 1359.102.3:2000correct

Frequently asked questions

How much power does the Marathon 200LTFC0372E3 have?

The Marathon 200LTFC0372E3 delivers 37 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1092093901 HJA2 112Mx-2

132MTFC0556-AU

132MTFC0556E3

132MTFC0754-AU

132STFC0228-AU

132STFC0228E3

132STFC0306-AU

132STFC0306E3

132STFC0552-AU

132STFC0552E3

132STFC0554-AU

132STFC0554E3

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare