Manitou MLT733-115
Series: Manitou Teleskopstapler-Starr
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The MLT733‑115 is a telehandler with a fixed upper frame from the Manitou Teleskopstapler‑Starr series. Manitou, based in France, produces this model within the MLT range, where the boom is rigidly attached to the chassis and operates solely through telescopic extension and boom angle.
The MLT733‑115 is equipped with an 85 kW engine and a displacement of 3 621 cm³. It can lift up to 3 300 kg at a maximum lift height of 6 900 mm. With a curb weight of 7 165 kg and a permissible total weight of 9 500 kg, the machine’s load capacity and ground pressure allow operation on both paved surfaces and lighter ground conditions. Its dimensions of 4 808 mm length and 2 392 mm width provide a compact turning radius, beneficial in confined work areas.
As no direct comparison within the series is provided, the MLT733‑115’s relative position cannot be defined. Given its 3 300 kg lift capacity and 6 900 mm lift height, the machine is suited for handling medium‑weight loads in agriculture, construction, and logistics where a fixed boom and compact size are required.
Manitou Teleskopstapler-Starr – fixed-boom telehandlers of the MT, MLT and MHT ranges: load capacities from 1,200 to 25,000 kg, example powertrain 85 kW at 3,621 cm³, operating weight from 7,165 kg
Manitou, based in Ancenis, France, is one of the world's leading makers of telehandlers; this page gathers the fixed, non-slewing models from the MHT, MLT, MRT (in its fixed build), MT ranges and other variants that the register could not assign to a named range. On these machines the boom is fixed to the chassis, so lift height and reach come only from the telescopic movement and the boom's angle.
Read on 3 more paragraphs
The register lists here 105 versions with load capacities from 1,200 to 25,000 kg, an engine output of 85 kW at 3,621 cm³ displacement, an operating weight of 7,165 kg, a gross vehicle weight of 9,500 kg, a length of 4,808 mm and a width of 2,392 mm.
Fixed-boom telehandlers are versatile work machines for agriculture, construction and industry, where they take pallets, buckets, forks or work platforms, combining forklift, wheel loader and crane duties in a single machine. Manitou competes here with makers such as JCB, Merlo and Bobcat, which also run broad telehandler ranges.
On a used example, the condition of the telescopic slide guides and wear pads inside the boom, the tightness of the lift and tilt cylinders, wear on the axles and four-wheel steering, and the condition of the attachment plate and quick-hitch all matter; spare parts and service run through Manitou's dense dealer network.
Sources: SpecCodex register, model data: Manitou Teleskopstapler-Starr, Manitou
Technical data
Engine
| Power | 85 kWcorrect |
|---|---|
| Displacement | 3,621 cm³correct |
Dimensions and weights
| Length | 4,808 mmcorrect |
|---|---|
| Width | 2,392 mmcorrect |
| Unladen weight | 7,165 kgcorrect |
| Gross vehicle weight | 9,500 kgcorrect |
Working data
| Lifting capacity | 3,300 kgcorrect |
|---|---|
| Lift height | 6,900 mmcorrect |
Where this model stands
Power-to-weight ratio: 11.9 kW/t (85 kW / 7.2 t)
Stronger than 66% of the telehandlers in the register — out of 661 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Manitou MLT733-115 have?
The Manitou MLT733-115 delivers 85 kW.
How much does the Manitou MLT733-115 weigh?
The unladen weight is 7,165 kg.
What is the gross vehicle weight of the Manitou MLT733-115?
9,500 kg.
What engine does the Manitou MLT733-115 have?
3,621 cm³ displacement.
What is the load capacity of the Manitou MLT733-115?
Load capacity is 3,300 kg, lift height 6,900 mm.
What are the dimensions of the Manitou MLT733-115?
4,808 mm × 2,392 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · forklift-international.com (retrieved August 2026) · How we check the data
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
