Manitou ME 316
Series: Manitou Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a forklift truck, the Manitou ME 316 belongs to the Manitou Forklift series. Engine output is 8.7 kW.
It will not go faster than 16 km/h — a working pace, not a travelling one. Operating weight comes to 3,120 kg. It carries 1,600 kg.
Within the range, rated power spans from 8.7 to 75.3 kW; with 8.7 kW, the ME 316 sits at the bottom end. The next one up is the ME 425 with 25.4 kW.
Technical data
Engine
| Power | 8.7 kWcorrect |
|---|
Dimensions and weights
| Width | 1,130 mmcorrect |
|---|---|
| Ground clearance | 90.2 mmcorrect |
| Unladen weight | 3,120 kgcorrect |
Drivetrain and chassis
| Tyre type | front 18x7-8 rear 15x4.5-8correct |
|---|---|
| Top speed | 16.1 km/hcorrect |
| Turning radius | 1,550 mmcorrect |
Working data
| Lifting capacity | 1,600 kgcorrect |
|---|---|
| Lift height | 3,300 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Gabelspreizung mm | 1,055.1 mmcorrect |
| Kraftstoffart | batterycorrect |
| Load centre | 500.1 mmcorrect |
| Mast tilt back | 6.5°correct |
| Mast tilt forward | 5.5°correct |
| Rear wheels | 2correct |
Where this model stands
Power-to-weight ratio: 2.8 kW/t (9 kW / 3.1 t)
Stronger than 23% of the forklift trucks in the register — out of 316 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Manitou ME 316 have?
The Manitou ME 316 delivers 8.7 kW.
How much does the Manitou ME 316 weigh?
The unladen weight is 3,120 kg.
How fast does the Manitou ME 316 go?
Top speed is 16.1 km/h.
What is the load capacity of the Manitou ME 316?
Load capacity is 1,600 kg at a 500 mm load centre, lift height 3,300 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.