Mahindra 5525
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Mahindra 5525 is a tractor from Mahindra. The four-cylinder engine produces 40 kW. Rated speed is 2,100 rpm.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 13 to 60 kW; with 40 kW, the 5525 sits in the upper third. Directly alongside are the 595-DI Turbo with 39 kW below and the 6000 with 44 kW above.
Technical data
Engine
| Engine make | Mahindracorrect |
|---|---|
| Engine model | NE452Rcorrect |
| Fuel | dieselcorrect |
| Power | 54 hp (40 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,054correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 2correct |
Working data
| Lifting capacity | 3,525correct |
|---|---|
| PTO speed | 540correct |
| Linkage category | Cat I & Cat IIcorrect |
Origin and approval
| Plant | Indiacorrect |
|---|
Frequently asked questions
How much power does the Mahindra 5525 have?
The Mahindra 5525 delivers 54 hp.
What engine does the Mahindra 5525 have?
4 cylinders, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.